How To Reset Dji Phantom 4 Controller

People seem to take this consequence where their DJI phantom 4 controller makes a continuous beeping noise.

I likewise had this result a couple of weeks agone, then I went on google simply I didn't observe a clear reply, I even read someone recommending buying a new controller as if it is sold for 7 bucks.

Anyways I saw some recommendations on some forums that helped me understand the problem and I fixed mine and so I thought I could share them in a more scannable manner.

Different types of noise your phantom controller can make

However in that location are different types of sounds the controller tin can brand, and They can be a trivial confusing sometimes.

Wait at the table beneath and identify which is the problem you are currently having

Sound it makes	Reason
Tri-tone Chime	Turning on/off
Continuous double beep	Bombardment low
Rapid beeping noise	Obstacle avoidance
Continuous-monotonous beeping	Needs scale
chinkle/continuous beeping	Return to home
Continuous beeping	stuck button

Chime when turning on DJI controllers make a tri-tone chinkle audio, and when turning off they likewise brand a opposite tri-tone chinkle sound.
Low battery beep when the drone's bombardment is low the controller makes a continuous double beep.
Obstacle avoidance when getting close to an obstacle the controllers make a rapid beeping dissonance.
Calibration when the controller needs a recalibration there volition be a continuous and monotonous beeping sound
RTH When return to home is activated the will be a chime followed by a continuous beeping sound
Stuck button If there is an unresponsive button on the drone it will also make a continuous beeping sound

And then, why is your phantom controller beeping and how practice you fix information technology

If your DJI Phantom 4 controller has a continuous beeping sound information technology ways either the drone or controller has a low bombardment or the controller sticks demand a recalibration. To ready the problem open DJI GO 4 and recalibrate the RC and refresh the firmware after.

Merely that is not the only outcome, in that location are several and there is no one way to fix the problem, and so I will list troubleshooting methods and try them one by i till yous get your trouble fixed

i. Recalibrate the controller

Kickoff turn on your controller
Connect the controller to your mobile device or tablet.
So turn on the remote controller and launch the DJI get app.
Printing the remote controller icon and choose RC calibration.
Finally , make sure both control sticks are centered and tap the start push button.

ii. Update/refresh Controller Firmware

Power on the remote controller
Connect it to your computer using a USB cablevision provided
Open and log into the DJI Assistant 2 software on your laptop
Select your drone'south remote controller
Next, yous will see the firmware version
Tap update if yous have an older version or tap refresh if it is up to date
Click on "Start Update"
On the next screen, you will see the firmware being downloaded, so transmitted and updating the remote controller
At 100%, you will run across the bulletin, "Update Consummate"
After the firmware is consummate, the controller will restart automatically

3. Stuck buttons on the RC

a continuous beeping can too be an indication of a stuck push on the RC.

If this is the case it is going to be a very easy fix beacuse it is easy to check which button is stuck by looking for an audible click or a physical and mechanical click upon pressing.

Should any of the buttons non make a sound or movement when pressed, attempt to place what is causing the button to be stuck in the pressed position and make clean, and move information technology gently until it is gratuitous.

4. Recalibrate the compass

IMU and compass calibration are crucial for a safe drone flight, then the beeping might be a way for DJI telling you to recalibrate them

Turn on your phantom 4 and the DJI go 4 app in the Remote Controller.
Get to the bill of fare in the top right corner.
And so get to the drone tab on the meridian left.
Go to Advanced Settings at the bottom.
And then go to Sensor State.
Select "Compass" in the top middle.
And tap "Calibrate Compass".
Then follow the onscreen instructions.

5. Calibrate IMU

After compass calibration follow upwardly with a IMU calibration.

Go to an open up area exterior, away from metal structures, cars, wires and such.
Turn on your phantom 4 and the DJI go 4 app in the Remote Controller department.
Tap on the 3 dots in the top right corner.
Tap on "Safety".
Ringlet down to the "Sensors" section.
Select "Calibrate" to the right of the Compass.
Click on "Outset".
The status indicators lights will blink yellow indicating that the calibration is about to offset.
And so follow the onscreen instructions.
Concur the aircraft horizontally and rotate information technology 360 degrees in the clockwise management.
When the indicator light changes from xanthous to solid light-green and so move on to the vertical calibration.
Hold the drone vertically with its olfactory organ pointing upwards and rotate it 360 degrees around its vertical axis.
The indicator will turn from yellow to solid green when successful.
When both horizontal and vertical compass calibration is completed successfully, the indicator light will start flashing greenish.

6. Downgrade the controller firmware

If refreshing the current firmware the issue doesn't seem to go, you can downgrade the firmware till the adjacent update comes out

You can downgrade your firmware both in DJI assistant and DJI go 4.

To downgrade the controller'south firmware in DJI assistant–

Ability on the controller
Connect it to your computer using the USB cable provided
Open the DJI Assistant 2 software on your laptop
Log in to the DJI Banana two app and select the device
Next, y'all will see the firmware version and older versions lined upwardly
Choose the version one below the current version you have
Then click install
Then the drone will automatically restart

To downgrade firmware in DJI go 4

Press and concur the menu icon (iii horizontal lines in the tiptop correct corner) for v seconds and a special firmware menu appears. You can now select which previous firmware version you would similar to downgrade to. Check it out.

It is improve if you downgrade with DJI become four considering the controller will follow automatically.

7. Mill Reset the controller

How to hard reset Phantom 4's controller

Turn on the controller, without the aircraft
Press C1, C2, and shutter (top right button nearest antenna)
Hold for nearly 5 seconds
Until it beeps (D-DDD), then turn the controller off.

How to reset phantom controller with DJI assistant

Open DJI Banana 2 app
select your remote control under Connected Devices
Beneath the Firmware List click "Restore Manufactory Defaults"
Click Confirm to showtime the mill reset procedure
Click Complete.

Final choice

If none of the methods fix it, you might take to send your controller to DJI.

If you determine to send information technology to DJI provide your serial number to them for them to check if you have a warranty which I don't retrieve y'all accept because the product is quondam anyways, After you hand it to DJI it can take upwardly to xv days till they send it back to you, and it tin can take longer if you don't alive in the United States

You volition nevertheless comprehend the aircraft price

If yous are located in Armenia, y'all may contact the local dealer or DJI'south back up via email to start a instance and send the unit dorsum.